Alloy pipe fittings belong to a kind of pipe, it is made of alloy steel material is called alloy pipe fittings, products mainly include alloy elbow, alloy flange, Alloy tee, Alloy four-pass, Alloy reducer, Alloy head, copper-nickel alloy pipe fittings. Alloy pipe fittings have excellent resistance to uniform corrosion, alloy pipe in the solid state of solution, 800H and 800AT alloy with excellent resistance to creep and stress cracking capacity. The various excellent properties of alloy pipe fittings are in line with the concept of environmental protection and energy conservation advocated by modern developing countries. Alloy Pipe Fittings materials have 12cr1mov, 15crmov910, a335p91, 16MN and other materials, alloy pipe fittings of various excellent features so that it has been widely used.
Groove Pipe connection, only in the outer surface of the connected pipe with a groove machine to squeeze out a trench, without destroying the pipe wall structure, this is a groove pipe connection unique technical advantages. If the use of traditional welding operations, many of the inner wall of the anti-corrosion layer of the pipeline will be damaged, the provision of galvanized pipe, lined with plastic steel pipe, plastic composite pipe, etc. can not be used welding and flange connection, otherwise needs two times.
Groove Pipe Fittings is a new type of pipe connecting pipe, the system diameter is equal to or greater than 100mm pipeline, should be segmented by the flange or groove connection. Groove Pipe connection operation is very simple, no special professional skills, ordinary workers after a simple training can be operated, because the product has a large number of fine technical part of the factory into the production of finished products. A pipe connection only takes a few minutes, the maximum simplification of the site operation of the technical difficulties, save hours, thus stabilizing the project quality, improve work efficiency.