Considerations for Installation and Storage of Carbon Steel Flanges

1. Carbon Steel Flange Installation Precautions
(1) Gasket should have good oil resistance and anti-aging performance, as well as better elasticity and mechanical strength. The installation should be based on the shape of the connector to choose different sections and sizes of gaskets, and placed correctly.
(2) Carbon steel flange aprons and regulations in any direction and head in the face, in the concave and convex groove to undertake, must not distort the installation negligence to carry on the review, the result and causes the rise mouth words, the molten steel ladle, after verifying to give the package injection mouth, the long water mouth will inject into the middle package.
(3) Carbon steel flange fastening force should be uniform, plastic cushion compression should be controlled at 1/3 left.
(4) Different steel structures can be used to mold the vibration process and the protection of the slag between the matching, thereby realizing the injection of stainless steel pipe fittings.
(5) Carbon steel flange should be sufficient strength, fastening without deformation. Carbon steel flange sealing surface should be clean, installation should be carefully clean up oil and rust.
2. Precautions for storage of carbon steel flanges
Carbon steel flange storage and maintenance is very important, the general project will choose carbon steel quality, carbon steel flange surface is very easy to appear floating rust, placing time long appearance is not beautiful, the storage of flanges shall not be placed directly on the ground, put the ground into some moisture-proof cushion, and then put the flange in order, placing the carbon steel flange and carbon steel flange between a channel, not only can play the role of ventilation but also facilitate the shipment of carbon steel flange.
Specific as follows:
① different materials to be stored separately, and do a good job of identification;
② the same material, different types and specifications are stored separately, and do the corresponding identification;
③ stacked neatly. Avoid bump, carbon steel flange attention rust.